Kia CARNIVAL 2023 Manual page 410

Driving your vehicle
Warning Volume
OMQ4041606
With the engine on, select 'Driver Assis-
tance → Warning Volume from the Set-
tings menu to change the Warning
Volume to 'High', 'Medium' or 'Low' for
Blind-Spot Collision Warning.
If you change the Warning Volume, the
warning volume of other Driver Assis-
tance systems may change.
CAUTION
僅 The setting of the Warning Timing
and Warning Volume applies to all
functions of Blind-Spot Collision
Warning.
僅 Even though 'Normal' is selected for
Warning Timing, if the front vehicle
suddenly stops, the initial warning
activation time may seem late.
僅 Select 'Late' for Warning Timing when
traffic is light and when driving speed
is slow.
NOTICE
僅 If the engine is restarted, Warning
Timing and Warning Volume will
maintain the last setting.
僅 If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
6 84
Blind-Spot Collision Warning (BCW)
Blind-Spot Collision Warning
operation
Warning
Blind-Spot Collision Warning will warn
and control as following operation.
僅 Vehicle detection
僅 Collision warning
Vehicle detection
OKA4050030
僅 Warning light will appear in the out-
side rearview mirror.
Blind-Spot Collision Warning will operate
as following circumstances.
僅 Vehicle speed: Above 20 km/h (12
mph)
僅 The speed of the vehicle in the blind
spot area: Above 10 km/h (7 mph)
Collision warning
Collision warning will operate when the
turn signal to change the lane in the
direction of the vehicle in the blind spot
area.
僅 To warn the driver of a collision, the
warning light on the side view mirror
will blink. At the same time, an audible
warning will sound.
僅 When the turn signal is turned off or
you move away from the lane, the col-
lision warning will be cancelled and