Nosepiece With Objectives - Zeiss Axioscope 5 Instruction Manual

ZEISS
3.2.9.3 Focusable Pol Eyepiece
The focusable eyepiece can be set into the binocular photo tube with upright image.
The focusable Pol eyepiece contains a reticle firmly glued into it (cannot be changed), which is of
defined orientation. When changing the interpupillary distance on the binocular photo tube, the
two eyepiece tubes follow this rotary motion synchronously, so that the position of the orienta-
tion grooves in the eyepiece tubes remains unchanged.
The PL 10x/23 GW foc. Pol eyepiece can be combined with a PL 10x/23 GW foc. eyepiece.

3.2.10 Nosepiece with Objectives

Purpose The nosepiece is used to hold the objectives and to swivel the desired objective into the beam
path.
Position The nosepiece is mounted on the upper part of the stand.
The following features and controls are available:
§
§
§
§
Info
The nosepiece with 5-positions HF/DF/Pol and 1-position HF/DF/DIC is equipped with five cen-
terable objective mounts (without DIC slots) as well as one objective mount with DIC slot (non-
centerable). Accordingly, all objectives can be centered relative to the rotary stage.
Fig. 25: Nosepiece with objectives
1
3
5
Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001
3 Product and Functional Description | 3.2 Controls and Functional Elements on Components
nosepiece with M27 mounting thread for six objectives
one objective position is fixed and four positions can be centered with the aid of two screws
each
equipped with three, six or no DIC positions depending on the configuration
equipped with slot for 6x20mm sliders (compensators, analyzers, quarter plates or fluores-
cence protection shield)
Nosepiece
DIC slot
Objective
1
2
3
4
5
2 Slot 6x20mm
4 Knurled ring for swivelling the nose-
piece
47