18.3
CLEANING
•
When changing valve plates and diaphragm, inspect all parts for dirt before assembling the pump head
and clean them if necessary.
•
As far as possible clean the parts with a dry cloth. Solvents should not be used as they can attack the
plastics and synthetic rubber parts. If a compressed air line is available, blow the parts out with it.
Warning
For recommended spare parts please see chapter 22.
www.mc-techgroup.com
Aggressive medium is possible.
Wear protective glasses and proper protective clothing during disassem-
bly, repair or cleaning!
MP47 | 1.01.02
23