Technical Data - M&C MP Series Instruction Manual

9

TECHNICAL DATA

Diaphragm pump
Part No.
Power supply
Degree of protection
Capacity max.
Operating pressure
Sample temperature
Ambient temperature
Storage temperature
Power consumption
Current consumption
Gas connections
Electrical standard
Material of sample contact-
ing parts
Operating mode
Weight
*The dimensions and designation of the screw-in threads correspond to the respective applicable standard. The tolerances of
the thread standards are matched to metal threads and cannot be applied to plastic threads.
Material mark according to ISO 1629 and 1043.1
Please note: Nl/h and Nl/min refer to the German standard DIN 1343 and are based on these standard conditions: 0 °C [32 °F], 1013 mbar.
10
MP47/230 V MP47/115 V
02P1000 02P1000a
230 V 50 Hz 115 V 60 Hz
6,0 Nl/min without pressure
0.85/1.25 bar abs., on suction/pres-
sure side: 2.5 Nl/min
0.4 to 2.2 bar abs.
0.75 A
100 % continuous duty, start of the pump only without pressure
MP47 | 1.01.02
MP47-Z/230V
02P1100
230 V 50 Hz
IP20 - DIN 40050
17 Nl/min without pressure
-30 to +80 °C [-22 to 176 °F]
-10 to +40 °C [14 to 104 °F]
-15 to +60 °C [5 to 140 °F]
110 W
1.7 A 0.75 A
G1/4" female DIN ISO 228/1*
EN 61010 part 1
PTFE
4.4 kg [≈ 9.7 lbs]
MP47-Z/115V
02P1100a
115 V 60 Hz
0.1 to 2.5 bar abs.
1.7 A
www.mc-techgroup.com