Ambient Conditions; Safety - M&C MP Series Instruction Manual

8

AMBIENT CONDITIONS

When the pump is operating the following ambient conditions must be maintained:
• Ambient temperature during operating: -10 to + 40 °C [14 to 104 °F].
• The pump must be protected from the effects of dust and water.
• During operating an adequate supply of air for cooling must be provided.
8.1

SAFETY

The protection class of the pumps MP47/MP47-Z is IP20 and so offer no protection against contact or foreign
bodies.
Warning
The pumps have no protection against water. In this case too, as far as is relevant, measures to protect the pump
must be taken before start-up.
Warning
The pumps may only be used for their intended purpose.
Note
www.mc-techgroup.com
It is therefore essential to provide protection for persons against contact
with live parts (e.g. electrical connections, motor windings) and moving
parts (e.g. fan). Protection against the entry of foreign bodies must also be
provided.
Aggressive medium is possible.
Wear protective glasses and proper protective clothing during dis-as-
sembly, repair or cleaning!
Components connected to the pump must be designed according to the
pneumatic performance of the pump (see technical data).
Take care that safety regulations are observed when connecting the pump
to the power supply. Specific safety instructions concerning sample must
be observed.
MP47 | 1.01.02 9