Flow Sensor Lph 125-1-A-Spst Incl. Connection Set Mounted On Mp47; Receipt Of Goods And Storage; Figure 6 Pump Mp47 - M&C MP Series Instruction Manual

FLOW SENSOR LPH 125-1-A-SPST INCL. CONNECTION SET MOUNTED ON MP47.../D
12
The optional available flow sensor LPH is provided with a mounting clip, 2 x male connectors 1/8"- 2 mm and 0.5
m PTFE tube 1 x 2 mm.
Figure 6 Pump MP47 .../D with flow sensor
Fitting position: vertical
Alarm level: 7 l/h
Switching function: NC or NO depending on mounting position,
=
NC lead of flow sensor in position at the top
Contact rating: DC max. 200 V, 50 W, 1 A;
AC max. 150 V, 70 VA, 0.7 A
Material: Acrylic, PTFE, nickel-plated brass
As monitoring gas, it can be used N
depending on the application (at least, however, sample pressure plus 0.2 bar compressed air).
In case of a correctly functioning diaphragm pump, no monitoring gas will be consumed.
13

RECEIPT OF GOODS AND STORAGE

•
Please take the sample pump and possible special accessories carefully out of the packaging material im-
mediately after arrival, and compare the goods with the items listed on the delivery note!
•
Check the goods for any damage caused during delivery and, if necessary, notify your transport insurance
company without delay of any damage discovered.
Note
14
51
LPH-7 l/h
ø 28
1/8" NPT f
or with max. 1.7 bar,
2
The equipment should be stored in a protected, frost-free room!
MP47 | 1.01.02 www.mc-techgroup.com