EVAL-AD5940 Evaluation Kit User Guide
INSTALLING AND USING IAR WORKBENCH
IAR Workbench is the IDE of choice for developing firmware
for theAD5940. IAR provides an evaluation licence that is free
but limits the code size to 32 kB. Currently, none of the evaluation
examples in the
AD5940
development pack exceed this.
HOW TO DOWNLOAD IAR
To download IAR Workbench, go to the IAR website. Click on
the Download Software link to download latest version. The
download is a large file (roughly 1.3 GB), so the internet
download speed affects download time.
Figure 48. IAR Download
After downloaded, run the executable. When the pop up in
Figure 49 appears, click Install IAR Embedded Workbench®
for ARM.
Figure 49. IAR Installation
Once the installation has completed, open IAR. Go to Help-
>License Manager to open the license manager dialog box.
Navigate to Licence > Get Evaluation Licence (see Figure 51).
The user must register with IAR to get the evaluation licence.
Follow online registration instructions. Select size limited
licence as opposed to time limited licence. An email is sent
with a link. Click this link to reveal the license number.
Rev. 0 | Page 25 of 27
Figure 50. IAR Drivers
Figure 51. Evaluation Licence
UG-1292
Need help?
Do you have a question about the ADICUP3029 and is the answer not in the manual?