Unify OpenStage 5 SIP User Manual page 43

Web Interface
DND
With this function you can allow a user to activate "Do not disturb".
Page 41

Feature code
Enter the code for the required OpenScape Voice feature, which you would like to assign to the
function key. OpenScape Voice supports the following features for example:
• Make line busy: the phone number is treated as busy for the hunt group.
• Stop hunt: the phone number is removed from the hunt group.
Page 40

Handset volume
Handset volume setting.
• Minimum value: 1 (quiet)
• Maximum value: 8 (loud)
• Default value: 4
Page 40

Idle dialing mode
You should only change this function if you are using a dial plan (programmed by administrator).
If the function is activated, you have the choice of two settings:
• Context
• Hot-Keypad
Context is the default setting. When on-hook dialing with this setting you must either confirm the
option "Dial", press the loudspeaker key or wait until the Auto Dial Timer has timed out in order to
set up the connection. If Hot-Keypad has been set, dialing takes place automatically as soon as
the character string entered matches an entry in the dial plan.
Page 41

Key click volume
Key click volume setting on the dialing keypad.
• Minimum value: 1 (quiet)
• Maximum value: 8 (loud)
• Default value: 2
Page 40

Loudspeaker volume
Setting the loudspeaker volume for OpenStage 5 SIP.
• Minimum value: 1 (quiet)
• Maximum value: 8 (loud)
• Default value: 2
Page 40

43