Precautions For Attachments; Unauthorized Modification; Safety At Worksite - Komatsu D65EX-12 Operation & Maintenance Manual

GENERAL PRECAUTIONS
Even if ROPS is installed, it does not work normally, if your seat belt is not fastened. Be sure to fasten your
seat belt when operating machine.

PRECAUTIONS FOR ATTACHMENTS

When installing optional parts or attachments, there may be problems with safety or legal restrictions, so
please contact your Komatsu distributor for advice.
Any injuries, accidents, or product failures resulting from the use of unauthorized attachments or parts will not
be the responsibility of Komatsu.
When installing and using optional attachments, read the instruction manual for the attachment, and the gen-
eral information related to attachments in this manual.

UNAUTHORIZED MODIFICATION

Any modification mode without authorization from Komatsu can create hazards. Before making a modification,
consult your Komatsu distributor.
Komatsu will not be responsible for any injuries, accidents, or product failures resulting from modifications
made without authorization from Komatsu.

SAFETY AT WORKSITE

Before starting operations, thoroughly check the area for any unusual conditions that could be dangerous.
When carrying out operations near combustable materials such as thatched roofs, dry leaves or dry grass,
there is a hazard of fire, so be careful when operating.
Check the terrain and condition of the ground at the worksite, and determine the safest method of operation.
Do not carry out operations at places where there is a hazard of landslides or falling rocks.
If water lines, gas lines, or high-voltage electrical lines may
be buried under the worksite, contact each utility and iden-
tify their locations. Be careful not to sever or damage any
of these lines.
Take necessary measures to prevent any unauthorized
person from entering the operating area.
In particular, if you need to operate on a road, protect
pedestrian and cars by designating a person for worksite
traffic duty or by installing fences around the worksite.
When traveling or operating in shallow water or on soft ground, check the shape and condition of the bedrock,
and the depth and speed of flow of the water before starting operations.
2-14
SAFETY