Explanation Of Components; Monitor Panel - Komatsu D65EX-12 Operation & Maintenance Manual

EXPLANATION OF COMPONENTS

EXPLANATION OF COMPONENTS
The following is an explanation of the devices needed for operating the machine.
To carry out suitable operations correctly and safely, it is important to understand fully the methods of operating the
equipment and the meanings of the displays.

MONITOR PANEL

(Monitor panel specification)
(1) Service meter
(2) Engine water temperature gauge
(3) Transmission oil temperature gauge
(4) Fuel gauge
(5) Engine water temperature caution lamp
(6) Charge lamp
SERVICE METER
This meter (1) shows the total operation hours of the machine.
Set the periodic maintenance intervals using this display. The
service meter advances while the engine is running, even if the
machine is not traveling.
While the engine is running, the pilot lamp (A) at the top of the
meters keeps flashing to indicate that the meter is advancing.
Meter (B) will advance by 1/10 for each hour of operation
regardless of the engine speed.
3-6
(7) Engine oil pressure caution lamp
(8) Glow signal lamp
(9) Transmission oil temperature caution lamp
(10) Monitor caution lamp
(11) Monitor caution cancel switch
OPERATION