Table of Contents
Advertisement
SERVICE PROCEDURE
GREASE UNIVERSAL JOINT
The undercover is heavy. Never try to open or close the cover when directly beneath it. When removing
bolts (2), carry out the work from the rear below the cover so that you can easily get out of the way.
1.
Remove the undercover at the rear bottom of the chassis
as follows.
1)
Remove 2 bolts (1) at the front of the machine.
2)
Support the cover with your elbow while gradually
removing 2 bolts (2) at the rear of the machine.
3)
Lower the cover gradually to open it.
2.
Apply grease to the grease fittings (2 places) shown by
arrows.
4-60
WARNING
MAINTENANCE
Advertisement
Chapters
Table of Contents
