Table of Contents
Advertisement
Key to Press
<F10>
Upgrading the BIOS
The upgrade utility allows you to upgrade the BIOS in flash memory. The code and data in
the upgrade file include the following:
•
On-board system BIOS, including the recovery code, BIOS Setup Utility, and
strings.
•
On-board video BIOS, and other option ROMs for devices embedded on the server
board.
•
OEM binary area
•
Microcode
•
A way to change the BIOS language
Preparing for the Upgrade
The following steps explain how to prepare to upgrade the BIOS, including how to record
the current BIOS settings and how to obtain the upgrade utility.
In the unlikely event a BIOS error occurs during the BIOS upgrade process, you may need
to follow a recovery process to return the system to service. For additional information,
see
"Server System References"
software and instructions.
Recording the Current BIOS Settings
1. Boot the computer and press <F2> when you see the message:
Press <F2> Key if you want to run SETUP
2. Write down the current settings in the BIOS Setup program.
Note: Do not skip step 2. You need these settings to configure your server at the end of the
procedure.
®
Intel
Server System SR1695WB Service Guide
Table 6. Setup Menu Key Use
Save and Exit - Pressing <F10> causes the following message to
display:
Setup Confirmation
Save Configuration changes and exit now?
If "Yes" is selected and <Enter> is pressed, all changes are saved and
Setup is exited. If "No" is selected and <Enter> is pressed, or if <Esc> is
pressed, the user is returned to where they were before <F10> was
pressed without affecting any existing values.
for a link to the necessary firmware and BIOS updates
Description
[Yes] [No]
63
Advertisement
Table of Contents
