Table of Contents
Advertisement
For send to folder (FTP)
Item
Host Name*
Path
Login User Name
Login Password
*
To specify a port number different from the default (21), enter using the format "host name:
port number" (e.g., FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
Ready to send.
Place original.
Folder Path Entry
SMB
Host Name
Path
FTP
Login
User Name
Login
Password
Specify the folder on the destination
computer.
Add to Addr Book
Next Dest.
Status
Data to be entered
Host name or IP address of FTP server
Path to the receiving folder.
For example, \User\ScanData.
Otherwise the data will be saved in the home directory.
FTP server login user name
FTP server login password
5
Destination
NOTE:
destination is correctly established. If Cannot connect.
appears, review the entry.
Connection
Test
Cancel
OK
08/08/2009
10:10
6
NOTE:
entry is registered in the Address Book.
7
3-25
Upon completion of all entries, press [Connection
Test] to check the connection.
Connected. appears when connection to the
To specify another destination, go to the step 6. To
specify only one destination, go to step 7.
Press [Next Dest.] and repeat steps 3 to 5 to
specify the destination. You can specify a
combined total of up to 10 FTP and SMB
destination folders.
When [Add to Addr Book] is displayed, the
Press [OK] to register the entry in the destination
list.
Basic Operation
Max.
characters
Up to 64
characters
Up to 128
characters
Up to 64
characters
Up to 64
characters
3
Advertisement
Table of Contents
