Table of Contents
Advertisement
2
Press [Printer] > [Change] of Emulation > [KPDL(Auto)] > [Alt Emulation].
3
Select the desired alternative emulation and then press [OK].
4
Press [OK].
Setting of KPDL error report
When an error has occurred during printing in KPDL emulation mode, set whether or not the error report is
output. The default setting is Off (not output).
Use the procedure below to specify the KPDL error report setting.
1
Press the System Menu Key.
2
Press [Printer] > [Change] of Emulation > [KPDL] or [KPDL(Auto)] > [KPDL Error Report].
3
Press [On] or [Off] and then press [OK].
4
Press [OK].
EcoPrint
EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a
problem.
Use the procedure below to specify the EcoPrint setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of EcoPrint.
3
Press [Off] or [On].
4
Press [OK].
Override A4/Letter
Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table
below shows the available settings.
Item
On
Off
Use the procedure below to specify the override A4/Letter setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Override A4/Letter.
3
Press [Off] or [On].
4
Press [OK].
A4 and Letter are regarded as the same in size. The machine will
use whichever size is in the paper source.
A4 and Letter are not regarded as the same in size.
8-34
Default Setting (System Menu)
Description
Advertisement
Table of Contents
