Olivetti d-Copia 3001MF Operation Manual page 253

Repeat Copying
Select the Repeat Copy default. The options are as follows. The table below shows the available settings.
Item
Off
On
NOTE:
This setting is not displayed when the optional Data Security Kit is installed or the Repeat Copy job is
set to 0.
Refer to page 4-36 for Repeat Copy.
Use the procedure below to set the default Repeat Copy setting.
1
Press the System Menu key.
2
Press [Common Settings], [
Copy.
3
Select the default for [Off] or [On].
4
Press [OK].
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available settings.
Item
Collate Off
On
Offset Off
Each Set
(Each Page)
NOTE:
Refer to page 3-13 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the defaults for Collate and Offset respectively.
4
Press [OK].
No Repeat Copy is performed.
Repeat Copy is performed.
] and [Next] of Function Defaults. Press [
Collate not performed.
Collate performed.
Offset not performed.
Offset performed. (If [Off] is selected of Collate, it is
performed [Each Page].)
], [Next] of Function Defaults. Press [
8-23
Default Setting (System Menu)
Description
] twice and [Change] of Repeat
Description
] twice and [Change] of Collate/Offset.
8