Olivetti d-Copia 3001MF Operation Manual page 329

Hide thumbs Also See for d-Copia 3001MF:
Table of Contents

Advertisement

Error Message
Memory is full.
Paper jam.
Print overrun.
Removable memory
error.
Removable memory
is full.
Replace all originals
and press [Continue].
Replace the waste
toner box.
Remove all originals
in the document
processor.
Scanner memory is
full.
Checkpoints
Are there any originals left in
the document processor?
Corrective Actions
Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
The process cannot be performed
due to insufficient memory. If only
[End] is available, press [End]. The
job will be canceled.
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch panel.
Leave the machine on and follow the
instruction to remove the jammed
paper.
Warning. Low printer memory. The
job was paused. Press [Continue] to
re-start the job.
This job is canceled. Press [End].
This job is canceled. Press [End].
Remove originals from the document
processor, put them back in their
original order, and place them again.
Press [Continue] to resume printing.
Press [Cancel] to cancel the job.
The waste toner box is full. Replace
the waste toner box.
Remove originals from the document
processor.
Scanning cannot be performed due
to insufficient memory of scanner.
Only one copy of the scanned pages
is available. Press [Continue] to print,
send or store the scanned pages.
Press [Cancel] to cancel the printing
job.
10-9
Troubleshooting
Reference
Page
10-15
10
2-34
9-7

Advertisement

Table of Contents
loading

Table of Contents