Table of Contents
Advertisement
A
B
NOTE:
Paper sizes are indicated on the cassettes.
To change between inch size and metric size (A, B
sizes), follow the steps below to adjust the size switch.
1. Holding the paper width adjusting tab, move the
paper width guide to a position other than that of the
paper.
2. Turn the size switch A 90°.
>
3. Move the size lever B up (C) or down (I).
C: metric size (centimeters) (A, B sizes)
I: inch size
4. Turn the size switch 90°to lock it.
>
4
Align the paper flush against the left side of the
cassette.
IMPORTANT:
•
Before loading the paper, be sure that it is not
curled or folded. Paper that is curled or folded may
cause paper jams.
•
Ensure that the loaded paper does not exceed the
level indicator (see illustration below).
•
When loading the paper, keep the side that was
closest the package seal facing up.
•
The paper length and width guides must be
adjusted to the paper size. Loading the paper
without adjusting these guides may cause skewed
feeding and paper jams.
•
Be sure that the paper length and width guides rest
securely against the paper. If there is a gap,
readjust the guides to fit the paper.
2-23
Preparation before Use
2
Advertisement
Table of Contents
