Table of Contents
Advertisement
If you select [Adjust Print Direction], load paper according to the steps below.
Example: copying on Letterhead
Original
Original
NOTE:
When loading cover paper in a cassette or multi purpose tray, load the face, on which printing is
supposed to be done, upward.
Use the procedure below to specify the actions performed for special paper types.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings
Action.
3
Select [Adjust Print Direction] or [Speed Priority].
4
Press [OK].
Switching Unit of Measurement
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of Measurement.
3
Select [mm] for metric or [inch] for inch.
4
Press [OK].
Paper
Finished
Paper
Finished
8-11
Default Setting (System Menu)
Cassette
Multi Purpose Tray
Cassette
Multi Purpose Tray
, [
]
and then [Change] of Special Paper
8
Advertisement
Table of Contents
