Table of Contents
Advertisement
by placing the paper on a flat surface and rubbing the edges gently a few times with a ruler. Printing onto paper
with rough edges may cause jams.
NOTE:
If the paper is not supplied correctly even after it is smoothed, load the paper in the multi purpose tray
with the leading edge raised a few millimeters.
Label
Be sure to feed labels from the multi purpose tray.
For selecting labels, use extreme care so that the adhesive may not come in direct contact with any part of the
machine and that the labels are not easily peeled from the carrier sheet. Adhesives that stick to the drum or
rollers and peeled labels remaining in the machine may cause a failure.
When printing onto labels, you must be liable for the print quality and possible trouble.
Some label paper has large margins on the top sheet. When using such paper, do not peel these margins from
the carrier sheet before completing output.
Allowed
Use label paper that conforms to the following specifications.
Top sheet weight
Basis weight
(overall paper weight)
Top sheet thickness
Labels consist of three layers as shown in the
illustration. The adhesive layer contains materials that
are easily affected by the force applied in the machine.
Top sheet
The carrier sheet bears the top sheet until the label is
used. This composition of labels may cause more
Adhesive layer
problems.
Carrier sheet
The label surface must be covered completely with the
top sheet. Gaps between labels may cause peeling of
labels, resulting in a serious failure.
Top sheet
Carrier sheet
Item
44 to 74 g/m²
104 to 151 g/m²
0.086 to 0.107 mm
Appendix-19
Not allowed
Specifications
Advertisement
Table of Contents
