Olivetti d-Copia 3001MF Operation Manual page 250

You can use the numeric keys to enter the number directly.
4
Press [OK].
Border Erase to Back Page
Select the Border Erase Method for Back Page of a sheet. The table below shows the available settings.
Item
Same as Front Page
Do Not Erase
NOTE:
Refer to page 4-17 and page 5-23 for Border Erase.
Use the procedure below to specify the border erase setting for the back of the page.
1
Press the System Menu key.
2
Press [Common Settings], [
Page.
3
Press [Same as Front Page] or [Do Not Erase].
4
Press [OK].
Margin Default
Set the default margin. The table below shows the measurement ranges that can be set.
Input units
Inch
Metric
Use the procedure below to set the default margin width.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Use the [+] or [-] to enter the margin widths for Left/Right and Top/Bottom.
You can use the numeric keys to enter the number directly.
4
Press [OK].
Border Erase performed in the same setting as the front page
No Border Erase performed on the back page
], [Next] of Function Defaults, [
-0.75 to 0.75" (in 0.01" increments)
-18 mm to 18 mm (in 1 mm increments)
], [Next] of Function Defaults, [
8-20
Default Setting (System Menu)
Description
] and then [Change] of Border Erase to Back
Range
] and then [Change] of Margin Default.