Table of Contents
Advertisement
Item
HTTPS
IPP
IPP over SSL
Raw Port
Y
*
: The machine must be restarted after the setting is changed.
N
: The machine does not need to be restarted after the setting is changed.
Use the procedure below.
The following procedure is an example for specifying the SMTP (E-mail TX) settings.
1
Press the System Menu key.
2
Press [System] and then [Next] of Network to display the network settings screen.
3
Display the item you want to set and press [Change] for that item.
In this example, press [Change] of SMTP (E-mail TX).
4
Press [On] or [Off].
5
Press [OK].
6
After changing the setting, restart the system or turn the machine OFF and then ON again.
For detailed information on restarting the system, refer to Restarting the System on page 8-63.
NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings are "On, Frame Type: Auto".
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of NetWare.
3
Press [On].
4
Press the key for the frame type you want to use.
Description
Select whether or not to communicate
using HTTPS.
SSL must be set to [On] in SSL
Setup on page 8-69.
Select whether or not to communicate
using IPP. When selecting [On], set the
IPP default Port Number. Use the IPP
default port 631.
Select whether or not to use IPP over
SSL.
SSL must be set to [On] in SSL
Setup on page 8-69.
Select whether or not to receive
documents using Raw Port.
8-67
Default Setting (System Menu)
Default
Restarting the
Setting
System*
On
Y
Off
Y
Port:631
Off
Y
On
Y
8
Advertisement
Table of Contents
