Table of Contents
Advertisement
DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below.
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off.
Use the procedure below.
9
Press [Off] of Bonjour and then press [OK].
10
Press [IP Address] and enter the address using the
numeric keys.
11
Press [Subnet Mask] and enter the address using
the numeric keys.
12
Press [Default Gateway] and enter the address
using the numeric keys.
13
Check if all the address entries are correct and
press [OK].
14
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-63.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [DHCP].
7
Press [On] or [Off] of DHCP and then press [OK].
8
After changing the setting, restart the system or
turn the machine OFF and then ON again.
For detailed information on restarting the system,
refer to Restarting the System on page 8-63.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
2-15
Preparation before Use
2
Advertisement
Table of Contents
