Table of Contents
Advertisement
Ready to copy.
Booklet
Off
1-sided
Place original.
>>Booklet
2-sided
>>Booklet
Book
Original
:
---
>>Booklet
:
Zoom
100%
Paper
:
---
Preview
Add Shortcut
Status
Copies
Original
Off
Binding
Left/Right
Cover
Binding
Top
Off
Finishing
Saddle
Binding
Stitch
Left
Binding
Top Edge Top
Right
Original
Binding
Orientation
Top
Cancel
OK
08/08/2009
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Booklet].
4
Press [1-sided>>Booklet] to produce a booklet
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet
from two-sided originals.
Press [Book>>Booklet] to produce a booklet from
an open book original.
10:10
5
If you selected [2-sided>>Booklet] or
[Book>>Booklet], choose the binding orientation in
Finishing.
If you selected [1-sided>>Booklet], choose the
binding orientation in Finishing.
6
If you choose [1-sided>>Booklet],
[2-sided>>Booklet], or [Book>>Booklet] you can
add the cover. Press [Cover], select [Cover] and
press [OK].
7
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
8
Press [OK].
9
Platen and press the Start key. Copying begins.
NOTE:
When using the platen, be sure to place the
originals in page order.
If the originals are placed on the platen,
consecutively replace each original after pressing
the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
4-20
Copying Functions
Advertisement
Table of Contents
