Table of Contents
Advertisement
Supported Paper
Use standard copy paper for regular copiers or laser printers. The printing quality will be affected by the quality
of paper. Poor quality paper may result in unsatisfactory output.
Basic Paper Specifications
The following table lists the specifications of paper that is supported with this machine. Refer to the subsequent
sections for further details.
Weight
Thickness
Dimensional accuracy
Squareness of corners
Moisture content
Grain direction
Pulp content
NOTE:
Some recycled paper does not meet requirements for use with this machine as listed in the Basic
Paper Specifications shown below, such as moisture or pulp content. For this reason, we recommend
purchasing a small amount of recycled paper as a sample for testing prior to use. Choose recycled paper that
gives the best printing results and contains low levels of paper dust.
We are not responsible for the problems occurred from the use of paper that does not conform to our
specifications.
Choosing the Appropriate Paper
This section describes guidelines for choosing paper.
Condition
Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a rough surface
or paper fiber lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor
copies but may also cause jams and shorten the useful life of the machine. Choose paper with a smooth and
even surface; however, avoid paper with a treated surface as it may damage the drum or fusing unit.
Ingredient
Do not use paper such as paper that has been surface-treated or paper that contains plastic or carbon. These
paper may produce harmful fumes from the heat of printing and may damage the drum.
Be sure to use the standard paper that contains at least 80% pulp, i.e., not more than 20% of the total paper
content consists of cotton or other fibers.
Criteria
Appendix-14
Specifications
Cassettes: 60 to 120 g/m
Multi purpose tray: 45 to 200 g/m
0.086 to 0.110 mm
±0.7 mm
90° ±0.2°
4 to 6%
Long grain (paper supply direction)
80% or more
2
2
Advertisement
Table of Contents
