Fig. 12 Cp27Xx_Wall Positioning; Fig. 13 Cp27Xx_Control Cabinet Installation - Beckhoff CP2712 Manual

To install and secure the panel PC in the control cabinet, follow the steps shown in Fig. 12 and 13:
1. Insert the panel PC at the intended position in the wall of the control cabinet. Make sure that the device is
secured against falling out until it is fastened properly.
Fig. 12: CP27xx_wall positioning
2. Fold out the clamping levers 90° (section A and B).
3. Tighten the clamping levers with the Allen key 3.0 mm (section C).
ð You have mounted the panel PC in the control cabinet.
A
Fig. 13: CP27xx_control cabinet installation
CP27xx
B
Version: 2.0
Commissioning
C
23