Table of Contents
Advertisement
[BRIGHTNESS LIMITATION]
Set whether to start projection with the brightness limitation disabled when the power of the projector is turned on
next time.
1)
Press as to select [BRIGHTNESS LIMITATION].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
*1 For details of the brightness limitation setting screen, refer to "When the brightness limitation setting screen is displayed" (x page 73).
212 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
Select this item when the projector is used with the brightness limited. In such case, upper limit for
the brightness of the light source will be limited to approximately 33 % (equivalent to the brightness
approximately 10 000 lm) regardless of the [LIGHT OUTPUT] setting.
The [BRIGHTNESS LIMITATION] setting can be changed in the brightness limitation setting screen
displayed after the projection is started.
Select this item when the projector is used with the brightness limitation disabled.
*1
Advertisement
Table of Contents
