Table of Contents
Advertisement
3)
Press as to select [ACTIVE FOCUS OPTIMIZER].
4)
Press the <执行> button.
f The [ACTIVE FOCUS OPTIMIZER] screen is displayed.
5)
Press as to select [FOCUS OFFSET SETUP].
6)
Press the <执行> button.
f The [FOCUS OFFSET SETUP] screen is displayed.
7)
Press as to select [FOCUS OFFSET BRIGHT] or [FOCUS OFFSET DARK].
8)
Press qw to set the parameter.
Displaying the test pattern
The internal focus test pattern used with [SETUP ASSISTANT] is displayed.
1)
Press as to select [LENS].
2)
Press the <执行> button.
f The [LENS] screen is displayed.
3)
Press as to select [ACTIVE FOCUS OPTIMIZER].
4)
Press the <执行> button.
f The [ACTIVE FOCUS OPTIMIZER] screen is displayed.
5)
Press as to select [FOCUS OFFSET SETUP].
6)
Press the <执行> button.
f The [FOCUS OFFSET SETUP] screen is displayed.
7)
Press as to select [TEST PATTERN].
8)
Press qw to select an item.
f The items will switch each time you press the button.
[OFF]
[0%]
[50%]
[100%]
Initializing the parameter
Return all the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] saved by each setting in
the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] to factory default settings.
1)
Press as to select [LENS].
2)
Press the <执行> button.
f The [LENS] screen is displayed.
3)
Press as to select [ACTIVE FOCUS OPTIMIZER].
4)
Press the <执行> button.
f The [ACTIVE FOCUS OPTIMIZER] screen is displayed.
5)
Press as to select [FOCUS OFFSET SETUP].
6)
Press the <执行> button.
f The [FOCUS OFFSET SETUP] screen is displayed.
7)
Press as to select [INITIALIZE], and press the <执行> button.
f The confirmation screen is displayed.
8)
Press qw to select [OK], and press the <执行> button.
176 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Does not display the test pattern.
Displays the focus test pattern of signal level approximately 0 %.
Displays the focus test pattern of signal level approximately 50 %.
Displays the focus test pattern of signal level approximately 100 %.
Advertisement
Table of Contents
