Table of Contents
Advertisement
Connecting the remote control to the projector with a cable
If you control the multiple projectors with a single remote control, use commercially available M3 stereo mini jack
cables to connect to the <REMOTE 1 输入>/<REMOTE 1 输出> terminals of the projectors.
The remote control is effective even in places where an obstacle stands in the light path or where devices are
susceptible to outside light.
Connecting terminals
Attention
f Use a cable that is 15 m (49'3") or shorter, with 2 core shielded. The remote control may not operate when the length of the cable exceeds
15 m (49'3") or when the shielding of the cable is inadequate.
34 - ENGLISH
Chapter 1 Preparation — Preparing the remote control
M3 stereo mini jack cable (commercially
available)
Connecting to a second projector
Remote control
Connecting to the remote control wired
terminal
Advertisement
Table of Contents
