Table of Contents
Advertisement
6)
Press as to select the channel to set, and pressqw to switch the item.
[LIGHT OUTPUT]
[INPUT SELECT]
[LENS POSITION]
[LENS H SHIFT]
[LENS V SHIFT]
[LENS FOCUS]
[LENS ZOOM]
[POWER]
[SHUTTER]
[FADE-IN]
[FADE-OUT]
[GEOMETRY]
[CUSTOM MASKING]
[FREEZE]
[COLOR]
[TINT]
[RASTER PATTERN]
[LENS H SHIFT MSB]
[LENS H SHIFT LSB]
[LENS V SHIFT MSB]
[LENS V SHIFT LSB]
[LENS FOCUS MSB]
[LENS FOCUS LSB]
[LENS ZOOM MSB]
[LENS ZOOM LSB]
[ENABLE/DISABLE]
[NONE]
*1 These items can be selected in following case.
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10C, ET-D75LE20C,
ET-D75LE30C, ET-D75LE40C) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a
projection lens with the stepping motor is attached.
f The setting can be also made by pressing as to select the channel, pressing the <执行> button to display
the item list, pressing asqw to select the item, and pressing the <执行> button.
f Same item cannot be set for multiple channels, except for [NONE].
Note
f Assign each item of [LENS H SHIFT MSB], [LENS V SHIFT MSB], [LENS FOCUS MSB], and [LENS ZOOM MSB] to a channel together
with [LENS H SHIFT LSB], [LENS V SHIFT LSB], [LENS FOCUS LSB], and [LENS ZOOM LSB]. These cannot be used when assigned to a
channel by itself.
f Assign each item of [LENS H SHIFT LSB], [LENS V SHIFT LSB], [LENS FOCUS LSB], and [LENS ZOOM LSB] to a channel together with
[LENS H SHIFT MSB], [LENS V SHIFT MSB], [LENS FOCUS MSB], and [LENS ZOOM MSB]. These cannot be used when assigned to a
channel by itself.
f MSB: Most Significant Byte
f LSB: Least Significant Byte
[Art-Net STATUS]
Display the content of control assigned to each channel and the received data of that channel.
1)
Press as to select [Art-Net].
2)
Press the <执行> button.
f The [Art-Net] screen is displayed.
3)
Press as to select [Art-Net STATUS].
4)
Press the <执行> button.
f The [Art-Net STATUS] screen is displayed.
224 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Adjusts the amount of light.
Switches the input.
Moves the lens position.
Adjusts the lens shift in the horizontal direction.
Adjusts the lens shift in the vertical direction.
Adjusts the focus.
Adjusts the zoom.
Controls the power status.
Controls the shutter.
Sets the fade-in time.
Sets the fade-out time.
Performs geometric adjustment.
Performs geometric adjustment using a computer.
Freezes the projected image.
Adjusts the color saturation.
Adjusts the tint.
Displays the raster pattern.
Coarsely adjusts the horizontal position of the lens.
*1
Finely adjusts the horizontal position of the lens.
*1
Coarsely adjusts the vertical position of the lens.
*1
Finely adjusts the vertical position of the lens.
*1
Coarsely adjusts the focus position of the lens.
*1
Finely adjusts the focus position of the lens.
*1
Coarsely adjusts the zoom position of the lens.
*1
Finely adjusts the zoom position of the lens.
*1
Enables/disables the control of the projector with the Art-Net function.
No definition
Advertisement
Table of Contents
