Table of Contents
Advertisement
6)
Press the <执行> button.
f The confirmation screen is displayed.
7)
Press qw to select [OK], and press the <执行> button.
f The [USER1] or [USER2] data is overwritten.
f If you press qw to select [CANCEL] and then press the <执行> button, the data will not be overwritten.
f The [WHITE BALANCE HIGH] screen is displayed.
8)
Press as to select [RED], [GREEN], or [BLUE].
9)
Press qw to adjust the level.
Note
f Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <默认> button on the remote control to return the setting for the selected item only to the factory
default setting.
f When color temperature has been changed, the colors before and after the change will differ slightly.
Changing the name of [USER1] or [USER2]
1)
Press as to select [COLOR TEMPERATURE].
2)
Press qw.
f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)
Press qw to select [USER1] or [USER2].
4)
Press the <执行> button.
f The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [COLOR TEMPERATURE NAME CHANGE].
6)
Press the <执行> button.
f The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.
7)
Press asqw to select the text, and press the <执行> button to enter the text.
8)
Press asqw to select [OK], and press the <执行> button.
f The name set to color temperature is changed.
Note
f When a name is changed, display of [USER1], [USER2] is also changed.
[GAMMA]
You can switch gamma mode.
1)
Press as to select [GAMMA].
2)
Press qw or the <执行> button.
f The [GAMMA] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
*1
[USER1]
[USER2]
[HDR ST2084-500]
[HDR ST2084-1000]
[HDR HLG]
[DICOM SIM.]
Chapter 4 Settings — [PICTURE] menu
Gamma mode unique to this projector.
Uses the gamma data registered by the user.
(Registration requires separate software. Consult your dealer.)
Gamma mode compliant with SMPTE ST 2084 that assumes a highest luminance of 500 cd/m
supports HDR (High Dynamic Range).
Gamma mode compliant with SMPTE ST 2084 that assumes a highest luminance of 1 000 cd/m
supports HDR (High Dynamic Range).
Gamma mode compliant with ITU-R BT.2100 (HLG: Hybrid Log Gamma system) that supports
HDR (High Dynamic Range).
The picture becomes similar to that of DICOM standard.
and
2
and
2
ENGLISH - 105
Advertisement
Table of Contents
