Table of Contents
Advertisement
f The <HDMI 输入 1>/<HDMI 输入 2> terminals can be connected to the external device with a DVI-D terminal by using the HDMI/DVI
conversion cable. However, this may not function properly for some external devices, and image may not be projected.
f The projector does not support VIERA Link (HDMI) and HDMI CEC (Consumer Electronics Control).
For <DVI-D 输入 1>/<DVI-D 输入 2> terminals of the Interface Board
This is an example when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10C) is installed in
<SLOT>.
DVD player with HDMI terminal (HDCP)
Note
f Setting the [DISPLAY OPTION] menu → [SLOT 输入] is required depending on the connected external device or the input signal.
f The <DVI-D 输入 1>/<DVI-D 输入 2> terminals can be connected with the HDMI and DVI-D compatible device. However, some external
devices may not be able to project images properly, such as the image not displaying.
f The <DVI-D 输入 1>/<DVI-D 输入 2> terminals support the single link for DVI 1.0. They do not support the dual link for DVI 1.0.
For <SDI 1 输入>/<SDI 2 输入/1 输出>/<SDI 3 输入>/<SDI 4 输入/3 输出> terminals of the Interface
Board
This is an example when the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10C) is installed in
<SLOT>.
12G-SDI signal output compatible device
Note
f Use a connection cable of 5C-FB or higher (such as 5C-FB, or 7C-FB), Belden 1694A or higher, or L-5.5CUHD manufactured by Canare
Electric Co., Ltd. to properly transmit images. The maximum cable length that can be used is as follows. However, this maximum cable
length is a rough guideline, and does not guarantee the transmission distance.
g HD-SDI signal, 3G-SDI signal: 150 m (492'2")
g 6G-SDI signal: 80 m (262'6") (When L-5.5CUHD is used, the cable length should be 110 m (360'11").)
Chapter 2 Getting Started — Connecting
HD-SDI signal, 3G-SDI signal, 6G-SDI signal, or 12G-SDI signal
ENGLISH - 57
Advertisement
Table of Contents
