Table of Contents
Advertisement
2)
Press the <执行> button.
f The [SLOT 输入] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <执行> button.
f The [SINGLE LINK SETTING] screen or the [DUAL LINK SETTING] screen is displayed.
f Proceed to Step 5) when [DUAL LINK SETTING] is selected.
4)
Press as to select [SDI1], [SDI2], [SDI3], or [SDI4], and press the <执行> button.
f The [SINGLE LINK SETTING] screen for the selected item is displayed.
5)
Press as to select [BIT DEPTH].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[12-bit]
[10-bit]
Setting [SIGNAL LEVEL] in [SLOT 输入] (SDI input)
1)
Press as to select [SLOT 输入].
2)
Press the <执行> button.
f The [SLOT 输入] screen is displayed.
3)
Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <执行> button.
f The [SINGLE LINK SETTING] screen or the [DUAL LINK SETTING] screen is displayed.
f Proceed to Step 5) when [DUAL LINK SETTING] is selected.
4)
Press as to select [SDI1], [SDI2], [SDI3], or [SDI4], and press the <执行> button.
f The [SINGLE LINK SETTING] screen for the selected item is displayed.
5)
Press as to select [SIGNAL LEVEL].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[64-940]
[4-1019]
When the optional Interface Board for 12G-SDI Optical (Model No.: ET-MDNFB10) is installed
Set this item according to the input and output signals when this Interface Board is installed in the slot.
Setting [SDI OPT 1/2 OUT] in [SLOT 输入] (OPT input)
Set whether or not to output the signal from the <SDI OPT 1/2 OUT> terminal.
1)
Press as to select [SLOT 输入].
2)
Press the <执行> button.
f The [SLOT 输入] screen is displayed.
3)
Press as to select [SDI OPT 1/2 OUT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
154 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [12-bit] or [10-bit].
Fixes to [12-bit].
Fixes to [10-bit].
Normally use this setting.
Select this item when gray is displayed as black.
Select this item when the input signal to the <SDI OPT 1 IN> terminal or the <SDI OPT 2 IN> terminal
that is selected for input is to be output from the <SDI OPT 1/2 OUT> terminal.
Does not output the signal from the <SDI OPT 1/2 OUT> terminal.
Advertisement
Table of Contents
