Table of Contents
Advertisement
[LENS HOME POSITION]
Operate in following procedure to move the projection lens to the home position.
1)
Press as to select [LENS].
2)
Press the <执行> button.
f The [LENS] screen is displayed.
3)
Press as to select [LENS HOME POSITION].
4)
Press the <执行> button.
f The confirmation screen is displayed.
5)
Press qw to select [OK], and press the <执行> button.
f [PROGRESS] is displayed in the [HOME POSITION] screen, and the projection lens is moved to the origin
position.
Note
f [LENS HOME POSITION] cannot be executed when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set to [NOT
SELECTED].
f [LENS HOME POSITION] can also be executed by pressing the <默认> button on the remote control while the lens shift adjustment screen
is displayed.
f The home position varies depending on the projection lens type. For details, refer to "Lens shift range" (x page 86).
[ACTIVE FOCUS OPTIMIZER]
Enable/disable the active focus optimizer function. The shift in focus caused by the change of the image
brightness can be reduced by enabling this function. It will also reduce the shift in focus right before enabling the
shutter function (shutter: closed) and right after disabling the shutter function (shutter: opened).
1)
Press as to select [LENS].
2)
Press the <执行> button.
f The [LENS] screen is displayed.
3)
Press as to select [ACTIVE FOCUS OPTIMIZER].
4)
Press the <执行> button.
f The [ACTIVE FOCUS OPTIMIZER] screen is displayed.
5)
Press as to select [ACTIVE FOCUS].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f [ACTIVE FOCUS] cannot be set when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set to [NOT SELECTED].
f When this function is set to [ON], the focus adjustment (adjustment of the focus position of the lens) is automatically performed when the
brightness of the image changes. Note following especially when constructing multi-display using multiple projectors such as using the edge
blending function by setting the [ADVANCED MENU] menu → [EDGE BLENDING].
g Position of the projected image may slightly shift due to the amount of focus adjustment.
g The projected image may slightly undulate during the focus adjustment.
f When this function is set to [ON], driving sound of the focus adjustment motor may be audible when the brightness of the image changes.
f When this function is set to [ON], the setting status of [ACTIVE FOCUS OPTIMIZER] ([ON]) is displayed in the focus adjustment screen.
f The active focus optimizer function operates within the range of focus adjustment. It may not operate properly when used close to the limit
value for the focus adjustment.
f The active focus optimizer function may not correctly operate when the optional Lens Fixed Attachment (Model No.: ET-PLF10, ET-PLF20)
is attached. Do not press the lens fixing clasp of the Lens Fixed Attachment too strong against the projection lens.
f The value of the parameter used by the active focus optimizer function is displayed as [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET
DARK].
f Parameter for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] will be the factory default value set for each type of projection lens
in following cases.
g When the [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [FOCUS OFFSET SETUP] → [SETUP
ASSISTANT] is not executed
Chapter 4 Settings — [PROJECTOR SETUP] menu
Disables the active focus optimizer function.
Enables the active focus optimizer function.
ENGLISH - 171
Advertisement
Table of Contents
