Remote Commander Information (About) - Sony RM -NX7000 Operating Instructions Manual

Rem ot e Com m ander inform at ion (ABOUT)
You can check the system information (used memory capacity, version, etc.) of
the Remote Commander in the display.
Press t he [SET] key f or 2 seconds or longer in t he
1
Hom e display.
The Set display appears.
Press t he [SYSTEM ] key.
2
The System display appears.
Press t he [ABOUT] key.
3
The system information display appears.
The version of the Remote Commander is shown in the "System" item in
the information.
Af t er checking, press t he [OK] key.
4
The display returns to step 3.
To f inish all set t ings, press t he COM M ANDER OFF
5
but t on f or 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
224
Downloaded from: https://www.usersmanualguide.com/