Remote Commander Information (About) - Sony RM-NX7000 Operating Instructions Manual

Remote Commander information (ABOUT)

You can check the system information (used memory capacity, version, etc.) of
the Remote Commander in the display.
Press the [SET] key for 2 seconds or longer in the
1
Home display.
The Set display appears.
Press the [SYSTEM] key.
2
The System display appears.
Press the [ABOUT] key.
3
The system information display appears.
The version of the Remote Commander is shown in the "System" item in
the information.
After checking, press the [OK] key.
4
The display returns to step 3.
To finish all settings, press the COMMANDER OFF
5
button for 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
224