Table of Contents
Advertisement
Continued
To erase all learned dat a set t o t he keys/but t ons in a
com ponent
You can erase all learned data by specifying the component on the Remote
Commander. This operation erases all learned data you programmed to the
function keys/buttons for a specific component.
Note
Keys that refer to another key will not function properly if the reference key (for Alias or
macro) is deleted.
1
Perf orm st eps 1 t o 3 in " Delet ing a f unct ion key (DELETE)" (page
92).
2
Press t he Com ponent key f or 2
seconds or longer.
Press the Component key whose learned
data you want to erase for 2 seconds or the
confirmation display of erasing the remote
control signal appears.
3
Press t he [YES] key.
The deletion of learned data begins. While
deleting learned data, a message appears.
When the deletion is complete, the display
returns to step 2.
If you press the [NO] key, the display
returns to step 2 without deleting.
4
To f inish all set t ings, press t he COM M ANDER OFF but t on f or 2
seconds or longer.
The display returns to the Home display. Or press the [EXIT] key repeatedly
until the Home display is shown.
96
Downloaded from:
Cust om izing t he Com ponent display (COM PONENT EDIT)
https://www.usersmanualguide.com/
Advertisement
Table of Contents
