Table of Contents Overview ... 3 JPEG files to be used ... 3 Transferring JPEG VIEWER to the RM-NX7000 ... 4 Using JPEG VIEWER ... 6 Showing JPEG files by slide show (SLIDE SHOW) ... 6 Selecting JPEG files to show (LIST DISPLAY) ... 9 Setting the screen saver ...
Overview JPEG VIEWER is an application to view JPEG files in a “Memory Stick,” and create a screen saver on the RM-NX7000 remote control. JPEG files to be used The following JPEG file specifications are required to run RM-NX7000: • Memory capacity for start-up: 5 MB* or more •...
Transferring JPEG VIEWER to the RM-NX7000 You need to download the latest kernel for the RM-NX7000 to your computer to use JPEG VIEWER. Consult the NAVITUS Web site (http://www.sony.com/nxremotesupport) about how to download the kernel. After downloading the latest kernel to your computer, use “NAVITUS Design”...
Step 3: Transfer the kernel from NAVITUS Design Close any currently open project files on NAVITUS Design. Click “Tools” of the menu bar, then select “Update Kernel for NX7000.” The “Update Kernel for NX7000” dialog box appears. Click of “Look in,” then select the folder that contains the kernel.
Using JPEG VIEWER Press the [APP] key for 2 seconds or longer in the Home display. The Application display appears. Press the VIEWER) icon. The “Memory Stick” confirmation display appears. JPEG VIEWER MENU display will appear . Note We do not guarantee the performance of the RM-NX7000 or the “Memory Stick,” if the “Memory Stick”...
Press the [DIRECTORY SELECT] key to select a directory for the slide show. Press the [v] or [V] key to select the directory name and then select the Directory Select area to confirm. z Tip • Press and hold [v]/[V] to move to the top/last page.
Press the [EXIT] key to confirm. Press the [EFFECT] key to add effects to the files. Select an effect from the display. You can preview the effect in the thumbnail. Press the [EXIT] key to confirm. Press the [START] key. The slide show starts as set.
To stop the slide show Press the display panel. If the error message “File pixel count is too high” appears. The application has a pixel count limitation when showing a JPEG file. For details, refer to “JPEG files to be used” on page 2. Setting the screen saver You can set the screen saver for RM-NX7000.
Selecting JPEG files to show (LIST DISPLAY) You can show a file to select it directly. Press the [LIST DISPLAY] key. The directory list in the “Memory Stick” appears. z Tip If you want to close the application display, press the [EXIT] key to return to the Application display.
Troubleshooting If you have problems setting up or using JPEG VIEWER, check the items below. If the problem persists, consult your nearest Sony dealer. Symptom JPEG VIEWER cannot be activated. Remedy • The memory of RM-NX7000 is insufficient. Delete Components or keys in the setting mode.