Table of Contents
Advertisement
Continued
4 OK button and Cursor Control buttons
Used to operate the menu display of a component being controlled by the
Remote Commander.
5 M ENU button
Shows the menu display of a component being controlled by the Remote
Commander.
6 EXIT button
Exits the menu of a component being controlled by the Remote Commander.
7 M emory Stick slot (page 200)
Used to insert a "Memory Stick."
8 HOM E button (pages 21, 37)
Returns to the first page of the Home display
9 COM M ANDER OFF button (page 38)
Turns off the indication of the touch panel display.
If this button is pressed while a macro is executed, the macro procedure
stops.
q; CH +/ – buttons
Select a channel.
qa RECALL button
The function of this button varies depending on the component being
controlled by the Remote Commander.
qs VOL +/ – buttons
Adjust the volume.
qd M UTING button
Mutes the audio of a component being controlled by the Remote
Commander. Press the button once again to resume at the previous volume.
About the VOL +/ – and M UTING buttons
The Remote Commander is factory-set to control the volume of a visual component on a
TV and the volume of an audio component on an amplifier.
To adjust the volume of the amplifier when controlling a visual component, or to adjust
the volume of the TV when controlling an audio component, see "Setting a function key of
another component to a Component display (ALIAS)" (page 100).
18
Downloaded from:
https://www.usersmanualguide.com/
Locat ion and Funct ion of Cont rols
Advertisement
Table of Contents
