Table of Contents
Advertisement
3
4
5
Downloaded from:
Press t he t ag of a Direct
Access but t on you w ant t o
set t he label t o.
For example, set the label by pressing the
[Button1] tag.
Note
You cannot select a tag, even if you press a
Direct Access button on the Remote
Commander.
Press t he [LABEL] key.
The software keyboard appears in the
display.
Set t he label of t he Direct
Access but t on.
For inputting letters to the label, see
"Inputting letters (label setting)" (pages
40 - 41).
Specified settings to the label of the
Direct Access button besides the
information described on pages 40 - 41
are as follows.
Letter input :
Starting a new line :
Pictographs :
[SIZE] :
[ALIGN] :
[COLOR] :
[Label] :
https://www.usersmanualguide.com/
Tags of the Direct Access buttons
Up to 8 letters can be input.
Not available.
Can be input. A pictograph is counted as 4 letters.
Not selectable. The letter size is fixed to [Small].
Not selectable. The letter location is fixed to
[Center].
Select a letter color of your preference.
Available.
Continued
53
Advertisement
Table of Contents
