Table of Contents
Advertisement
3 When program m ing a m acro f or a Com ponent key or a
Direct Access but t on
Select a Component key or a Direct Access button a macro is to be programmed
for.
1
2
3
4
,
If the Component key/ Direct Access button selected in step 4 has already been
programmed w ith a macro
The overwrite confirmation display appears.
Press the [YES] key to overwrite the existing macro with a new one.
Press the [NO] key to cancel the setting. The display returns to step 4.
Downloaded from:
Press t he [SET] key f or 2 seconds or longer in t he
Hom e display.
The Set display appears.
Press t he [HOM E EDIT] key.
The Home Edit display appears.
z Tip
You can program a macro for a Direct Access button, by pressing the [DIRECT
ACCESS] key in this step. For details, see "Programming an action to skip to the
desired page for a Direct Access button" (page 55).
Press t he [COM PONENT
M ACRO] key.
Press a Com ponent key or a
Direct Access but t on you
w ant t o program a m acro
f or.
Go on t o " St ep 2: Set t ing a m acro" (page 120).
https://www.usersmanualguide.com/
119
Advertisement
Table of Contents
