Sony RM -NX7000 Operating Instructions Manual page 65

5
6
7
Downloaded from:
If you w ant t o delet e all learned dat a
Press the [YES] key. The data deleting message appears. When deletion is
complete, the display returns to step 4.
If you do not w ant t o delet e all learned dat a
Press the [NO] key. Learned data will not be deleted and the display will
return to the previous one.
Press t he key or but t on
w hose learned signal you
w ant t o delet e.
When deletion of the learned signal is
complete, the key stops blinking and
appears released (normal).
When the button that has learned the
remote control signal is pressed, the
deletion confirmation message appears.
If you w ant t o delet e t he learned signal of t he but t on
Press the [YES] key. The button will return to the default setting status,
and the display will return to the previous one.
If you do not w ant t o delet e t he learned signal of t he
but t on
Press the [NO] key. The learned signal will not be deleted and the display
will return to the previous one.
z Tip
Using the NEXT/BACK button, you can select the page where you assigned the
key or button whose learned signal you want to delete.
Press t he [OK] key.
The learned signal is deleted, and the
display returns to step 4.
To f inish all set t ings, press t he COM M ANDER OFF
but t on f or 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
https://www.usersmanualguide.com/
65