Programming The Preset Codes Of Components (Preset); Default Settings Of Component Keys - Sony RM -NX7000 Operating Instructions Manual

Program m ing t he preset codes of
com ponent s (PRESET)
You can register components to the Remote Commander by programming the
component brand preset codes.
Programming of the preset code is required in the following cases:
– To use a Sony component that is not registered to the Remote Commander by
the default setting
– To use a component other than Sony's
New components can be registered to the Remote Commander by downloading their
preset codes from the web site and programming for the Remote Commander. For details,
refer to the manual (Help) of "NAVITUS Design."
Default set t ings of Com ponent keys
Component key
TV
VCR
CABLE
DVD
DVR
SAT
RCVR
CD
MD
DSP
TAPE
DAT
DVD RECORDER
LD
HDAR
LIGHT
42
Downloaded from:
Category of component
to be controlled
TV
VCR
• Analog cable
• Digital cable
DVD player
Hard disc video recorder
Digital satellite
Receiver
CD player
MD deck
Digital surround processor
Cassette deck
DAT deck
DVD recorder
LD player
Hard disc audio recorder
Light
https://www.usersmanualguide.com/
Brand and type of component
Sony TV
Sony VHS VCR (VTR3)
Sony digital cable
Sony DVD player (DVD1)
Sony hard disc video recorder
Sony digital satellite
Sony receiver
Sony CD player
Sony MD deck
Sony digital surround processor
Sony cassette deck
Sony DAT deck
Sony DVD recorder
Sony LD player
Sony hard disc audio recorder
Light