Table of Contents
Advertisement
Continued
Press t he NEXT/BACK but t on on t he Rem ot e
5
Com m ander t o select a w allpaper.
Press t he [OK] key.
6
The preview of the Component display
with the selected wallpaper appears.
Press t he [OK] key.
7
The selected wallpaper is set to the Component display, and the display
returns to step 4.
If you press the [CANCEL] key, the display returns to step 5.
To f inish all set t ings, press t he COM M ANDER OFF
8
but t on f or 2 seconds or longer.
The display returns to the Home display. Or press the [EXIT] key
repeatedly until the Home display is shown.
About the w allpapers imported w ith "NAVITUS Design"
For wallpapers (imported) other than those set at the factory, only wallpapers
imported for a project can be read to the Remote Commander and selected . You
cannot read a wallpaper imported as the common wallpaper for all projects.
When importing a wallpaper image, you can select whether to import the
wallpaper for a specified project, or import it as the common wallpaper for all
projects in the dialog box of "Options" on "NAVITUS Design."
For details, see "Changing the NAVITUS Design settings" of the "NAVITUS
Design" Help.
104
Downloaded from:
Cust om izing t he Com ponent display (COM PONENT EDIT)
https://www.usersmanualguide.com/
Advertisement
Table of Contents
