Sony RM -NX7000 Operating Instructions Manual page 142

Continued
5
Press a Tim er program key w hose
m acro execut ion you w ant t o check.
The label for the Timer program key and
the timer operation time are displayed, and
the remote control signals of the macro
programmed for the Timer program key are
transmitted.
After the test execution, the display returns
to step 5.
If there is a step that is not correctly linked in the macro
A message saying that a macro is not correctly linked appears in the display.
If you press the [OK] key, the display returns to the previous one.
To finish the setting
Press the COMMANDER OFF button for 2 seconds or longer. The display returns to
the Home display. The setting finishes.
Note
Keys whose execution of the Timer program setting is set to ON in step 5 appear pressed
and cannot be selected.
For details on execution of a Timer macro, see "To set the execution of a Timer macro (to
ON/OFF)" below.
To set t he execut ion of a Tim er m acro (t o ON/OFF)
Set the execution of a Timer macro setting to ON/OFF. If you set the execution
setting to ON, the Timer macro will be executed. If you set to OFF, the Timer
macro will not be executed.
1
Press t he [SET] key f or 2 seconds or longer in t he Hom e display.
The Set display appears.
2
Press t he [TIM ER] key.
3
Press t he [TIM ER ON/OFF] key.
142
Downloaded from: https://www.usersmanualguide.com/
M acro operat ion using t he Tim er funct ion