Table of Contents
Advertisement
Charging w it hout using t he Bat t ery charging st and
Connect the AC power adaptor directly to the DC IN jack of the Remote
Commander. You can operate the Remote Commander while charging it.
Notes
• After starting up, charging continues. Do not disconnect the AC power adaptor until
charging is complete and be disappears.
• While starting up (while the "NAVITUS" logo is displayed), do not disconnect the AC
power adaptor, as it may cause a malfunction.
• After charging starts, it takes a maximum of about 8 hours to complete charging.
z Tips
• If you charge the Remote Commander frequently, charging time will be reduced.
•When be is not shown in the display, charging is not necessary.
Downloaded from:
https://www.usersmanualguide.com/
15
Advertisement
Table of Contents
