Sony RM -NX7000 Operating Instructions Manual page 126

Continued
3
Press t he [M ACRO VIEWER] key.
4
Press t he Com ponent key or a Direct
Access but t on w hose m acro you
w ant t o check.
The macro procedure is shown in the
display in order. When showing is
complete, the display returns to step 4.
Notes
• You cannot select a Component key for which no macro is programmed.
• The macro procedures of the [JUMP] key and the [DELAY] key are not displayed.
To manually check the programmed macro procedure in order
Press the [PAUSE] key to suspend consecutive showing. Press the [PAUSE]
key again to resume consecutive showing.
While consecutive showing is suspended, press the NEXT button to show
the next macro step and press the BACK button to show the previous step.
5
To f inish all set t ings, press t he COM M ANDER OFF but t on f or 2
seconds or longer.
The display returns to the Home display. Or press the [EXIT] key repeatedly
until the Home display is shown.
126
Downloaded from:
Program m ing a series of act ions (m acro) for a key/but t on
https://www.usersmanualguide.com/