Poe Power Injector; Table 5: Features - Poe Power Injector Ports; Figure 17: Features - Ethernet Poe - Indoor Power Module Pinout - Redline RDL-3000 Installation Manuallines

RDL-3000 Ellipse TMA Sector Controller Installation Guidelines
2.7

PoE Power Injector

The PoE adapter provides operational power for the Ellipse TMA and the Ethernet
connection to the wireless interface.
IMPORTANT: This is an indoor rated device and must be installed in an indoor facility or
weatherproof cabinet.

Figure 17: Features - Ethernet PoE - Indoor Power Module Pinout

Data
1
2
3
4
5
6
7
8
Customer equipment including personal computers, routers, etc., must be connected
only to the DATA port on the PoE unit.
Only the outdoors Ethernet interface cable connecting the Ellipse TMA or TMA Tower
Amplifier can be safely connected to the PoE DATA & POWER OUT port. Customer
premises Ethernet equipment may be damaged if connected directly to the PoE DATA
& POWER OUT port.
70-00159-02-00

Table 5: Features - PoE Power Injector Ports

Function
Data pair 1
Data pair 1
Data pair 2
NC
NC
Data pair 2
NC
NC
Proprietary Redline Communications © 2014
Data & Power
Out
1
2
3
4
5
6
7
8
to Service Personnel: 48 VDC
Page
Function
Data pair 1
Data pair 1
Data pair 2
+VDC
+VDC
Data pair 2
-VDC
-VDC
26 of 59 July 18, 2014