RDL-3000 Ellipse TMA Sector Controller Installation Guidelines
Power Port
The Power In port (11 pin connector) receives DC power for the PoE device.
Ground Lug
A ground-lug
is provided on the Ellipse TMA chassis. Use this connection to
terminate a grounding wire. All Ellipse TMA systems must be properly grounded to
protect against power surges and accumulated static electricity.
RF Out Ports
The two RF ports (N-type F connectors) conduct RF signals between the Ellipse TMA
and the antenna system (ordered separately). The Ellipse TMA can be operated using a
SISO (single antenna) or MIMO (multiple antenna) system. RF jumper cables are
included with Redline mounting kits.
Figure 10: Features: Ellipse TMA RF Ports (Top View of Radio)
Figure 11: Features: Ellipse TMA Power Amplifier Dimensions
70-00159-02-00
Proprietary Redline Communications © 2014
Page
21
of 59
July 18, 2014