Site Preparation; Mast For Ellipse Tma Sector Controller; Figure 32: Preparation - Ellipse Tma Sector Controller Mast Requirements - Redline RDL-3000 Installation Manuallines
Ellipse tma sector controller multi-sector system (uwt) system
Hide thumbs
Also See for RDL-3000:
- User manual (150 pages) ,
- Installation manuallines (65 pages) ,
- Configuration instructions (9 pages)
Table of Contents
Advertisement
RDL-3000 Ellipse TMA Sector Controller Installation Guidelines
5
Site Preparation
Deployment of a four-sector TMA base station may requires multiple masts or equivalent
mounting platforms.
5.1
Mast for Ellipse TMA Sector Controller
The installer must prepare a mast for mounting the Ellipse TMA Sector Controller.
The Ellipse TMA Sector Controller system with cabling and 475 mm (19 in) UHF antenna
weighs approximately 00 kg (00 lb). Wind-loading may add approximately 50% for
approximately 00 Kg (00 lb).
(1.75-4.5 in).
Figure 32: Preparation - Ellipse TMA Sector Controller Mast Requirements
70-00159-02-00
Redline equipment is compatible with mast sizes 45-115 mm
Proprietary Redline Communications © 2014
Chapter 5
Page
39
of 59
July 18, 2014
Advertisement
Table of Contents
