Ellipse Tma Sector Controller; Ethernet/Power Port; Tma-Sync Port; Figure 5: Features: - Ellipse Tma Ports - Redline RDL-3000 Installation Manuallines

RDL-3000 Ellipse TMA Sector Controller Installation Guidelines
2.1

Ellipse TMA Sector Controller

Figure 5: Features: - Ellipse TMA Ports

Ethernet/Power Port

The Ethernet port (RJ-45 / F connector) receives DC power and provides Ethernet
connectivity with the local network. The Ethernet port connects to the PoE adapter using
a weatherproof CAT-5e Ethernet cable.

TMA-SYNC Port

The TMA-Sync port (TNC / F connector) is used to synchronize operation of the remote
TMA SYNC RF Tower Amplifier units.
The TMA-SYNC ports of all units must be interconnected using LMR-195 (or equivalent)
coaxial cable terminated with TNC / M connectors. Use TNC Tee adapters to connect
units in a daisy-chain configuration.
Important: Multiple Tower Amplifiers can be synchronized using up to 46 m (~150 ft).of
interconnecting synchronization cable.
70-00159-02-00 Proprietary Redline Communications © 2014 Page 18 of 59 July 18, 2014